What is above a drop ceiling?

A drop or dropped ceiling is the ceiling that is hung below the main (structural) ceiling. The area above the dropped ceiling is called the plenum space, as it is usually used for the HVAC air return. The plenum space is also very commonly used to conceal piping, wiring, and ductwork.

Definition. A drop ceiling, or suspended ceiling, consists of panels or tiles that hang a few inches below the main structural ceiling. In other words, the suspended ceiling does not make up a permanent structural foundation, but rather serves as a covering for the more solid framework above.

Additionally, what is the point of a drop ceiling? Aesthetics. Modern dropped ceilings were initially created to hide the building infrastructure, including piping, wiring, and/or ductwork, by creating a plenum space above the dropped ceiling, while allowing access for repairs and inspections. Drop ceilings may also be used to hide problems, such as structural damage.

Also, is it cheaper to drywall or drop ceiling?

Drop ceilings are not only a more affordable option (usually half the cost), but also offer more design flexibility compared to drywall. Drop ceilings are the preferred application in basements due primarily to how easy it is to access pipes, electrical work and air ducts above the ceiling.

Is drywall or drop ceiling better?

Drywall vs Drop Ceilings in the Basement. However, a drop ceiling offers easy access to your home’s important pipes and ducts. In fact, if your basement ceiling features electrical junction boxes in between its joists, sealing them in with drywall is not only inadvisable, but against building codes.

What do you do with a drop ceiling?

5 Drop Ceiling Makeover Ideas Paint them. Using matte paint in a dark color can help your ceiling recede, which not only makes the tiles less noticeable but gives the impression of taller ceilings. Replace them with tin. Wallpaper them. Minimize the grid.

What is the minimum clearance for a drop ceiling?

3 to 8 inches

Is a drop ceiling fire rated?

Other times, the drop ceiling is considered part of this fire barrier ceiling and MUST have fire barrier rated ceiling tiles. Ceiling tiles that are rated Class A for flame spread but do NOT have a fire barrier rating are treated as an interior finish like a paint.

How much weight can you hang from a drop ceiling?

Hang up to 15 lb! The actual weight limit likely depends on your drop ceiling grid. We do not recommend hanging items heavier than 15 lbs because it may damage or warp your drop ceiling grid due to excess & uneven weight being placed on on the ceiling grid bars.

How much does a drop ceiling cost?

The average cost for a 10’x12′ room is around $1,500.00 installed. If you do it yourself, the material costs are: Tiles – $30.00 to $55.00 per case (check the quantity per case as it varies, the lower end is usually 20 tiles per case, 2’x2′) Gridwork – about $72.00.

What can I put on my ceiling instead of drywall?

The following alternatives are not always cheap or easily installed, but they lack the many flaws which drywall suffers from. Brick and Masonry. © Photographee.eu / Fotolia. Cement Board. Photo Credit: Michael Holley. Lath and Plaster. © Richard Blackwater / Fotolia. Veneer Plaster. Wood. Ceiling Planks. Drop Ceilings.

How do you insulate above a drop ceiling?

They also offer plenty of air space above the tiles for utility lines. The best way to insulate a drop ceiling is to install batt insulation between the ceiling joists before installing the hanging grid; this installation would proceed as any insulation installation.

What is a tray ceiling?

Shop This Look A tray ceiling, also called an inverted or recessed ceiling, features a center section that is several inches (or several feet) higher than the areas around the perimeter of the room. This design allows for the use of colors painted on the trim that can turn a bland ceiling into a focal point.

What is the best ceiling for a basement?

Low Basement Ceiling Ideas Beadboard. This style of wood paneling is extremely popular in Cape Cod-style homes, although it can be used with most architectural styles. Corrugated Metal. Drywall. Painted Exposed Beams and Pipes. Wood Paneling. Wood Planks. Drop Ceiling Tiles. PVC Tiles.

How do you measure for a drop ceiling?

To do this, you must measure the room and apply a simple formula. Measure the length and width of the ceiling, and note the measurements on a piece of paper. Divide the ceiling tile length into the room’s width. Divide the result in half to get the length of your border panel.

How much does it cost to finish a 1000 sq ft basement?

The cost of a basement is between 10 and 35 dollars per square feet. Let’s say an average basement is 1,000 square feet of finished space. So the cost of a basement is between $10,000 and $35,000. 10k if you’re doing most of the work yourself and up to $35,000 if you’re hiring a contractor to finish your basement.

Do I need insulation in basement ceiling?

Unconditioned Basements If there is no need for this heat, the basement ceiling should be insulated to keep the heat upstairs in the living space (if some heat is desired in the basement, see “Conditioned Basements” below). Insulating the basement ceiling will keep most of the heat upstairs in the living space.