The model number is located on the underside of the sink, either molded into the sink material or stamped with ink. Typically the model number starts with a K, such as K-5942. In some cases, the model number is preceded by 97 or 87. For example, 975942 contains the model number 5942.
The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.” In the image above, the model number is 6227-V3-AA.
One may also ask, do Kohler sinks have a lifetime warranty? KOHLER CO. *KOHLER Cast Iron kitchen sinks installed in North America carry a Lifetime Limited Warranty for as long as the original consumer purchaser owns his or her home.
Subsequently, one may also ask, how do I identify my Moen faucet model?
The model/series number is usually a four or five digit number beginning with “7” or “8” and may be followed by letters. The series number may sometimes be found on the underside of the spout. The series number is often found on the back of the decorative ring located at the bottom of the spout.
What year is my Kohler engine?
Thank you for contacting Kohler engines. The year and day in which your engine was built was the 103rd day of 1995. The first five numbers of your serial number indicate this. With our newest 10 digit serial number format, you just have to add 70 to the first two numbers to find out the year of manufacture.
Are Moen faucets lifetime warranty?
Warranty for Moen Branded Bath Accessories Limited Lifetime Warranty – If this product fails due to a defect in materials or workmanship at any time during the life of the product, Moen will replace it free of charge, postage-paid. Simply contact Moen at 1-800-BUY-MOEN for replacement information.
How do I identify my faucet cartridge?
For sink faucets, look at the front of the spout. The logo may also be on the base of the spout, where it meets the sink, either on the front or the back. For shower faucets, look on the round plate (escutcheon) behind the handle, on the handle itself, or perhaps on the actual valve behind the wall.
How do I identify my Kohler shower valve?
To identify the model number of your shower valve, first remove the trim, or handle and decorative plate. This allows you to expose the valve for proper identification. For assistance with removing the trim, refer to “Identify and Remove Single-Control Bath and Shower Trim”.
How do I identify my Kohler toilet color?
Remove the lid of your toilet tank and check the inside of the tank for the Kohler model number. The model number always consists of four numbers beginning with a “3” or “4” and may or may not have a letter “K” preceding it. In some cases, additional model identifiers follow the main number (for example, K-3385-AA).
How do I identify my sink manufacturer?
The most obvious and quickest solution is to look for a logo — the manufacturer’s symbol — that identifies its faucets. Each manufacturer has a distinctive logo that sometimes appears on the escutcheon — the plate beneath the faucet — the body of the faucet, the spout itself or somewhere on the handle.
Are Delta faucets lifetime warranty?
The Delta Faucet Lifetime Limited Warranty is one of the most extensive in the industry. It covers manufacturer defects in faucet function as well as faucet finish, provided you are the original purchaser. Labor charges and/or damage incurred during installation, repair or replacement are excluded.
Where is the serial number on a Kohler toilet?
Serial numbers are located on the back side or back underside of the bidet bowl. The tank lid for both one-piece and two-piece toilets includes a part number that identifies the lid. The toilet seat model number is not located on the seat. Locate the model number on the product package or your sales receipt.
Where is the model number on an American standard faucet?
You’ll notice a four-digit number located on the back of the tank, near the water level mark. This is your tank model number.
Do all faucets have cartridges?
The first three (ball, disc, and cartridge) are all types of “washerless faucets” since they do not use rubber or neoprene washers. The latter (compression) is very much like your basic washer faucet. Take a look at each type and gain an overview of how they work and how they’re different.
What is a faucet broach?
The broach is atop the faucet stem, resembling a shape of a small-toothed gear. The purpose of the gear’s splines is to fit inside the female end of a faucet handle to control the opening and closing of faucet valve.
How do I identify my Delta Faucet?
The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet.
What faucet has a red and blue circle?
Delta Faucet RP73192 Classic, Red/Blue Button – Faucet Handles – Amazon.com.